| Engine | |
| Net Power |
354 hp / 264 kW |
| Gross Power |
401 hp / 299 kW |
| Flywheel Power |
354 hp / 264 kW |
| ISO 9249 |
354 hp / 264 kW |
| SAE J1349 |
350 hp / 261 kW |
| EEC 80/1269 |
354 hp / 264 kW |
| Bore |
5.4 in / 137 mm |
| Stroke |
6.7 in / 171 mm |
| Displacement |
928 in3 / 15.2 L |
| Transmission | |
| Forward 1 |
3.3 mph / 5.3 km/h |
| Forward 2 |
5.8 mph / 9.3 km/h |
| Forward 3 |
9.7 mph / 15.6 km/h |
| Reverse 1 |
3.8 mph / 6.1 km/h |
| Reverse 2 |
6.6 mph / 10.6 km/h |
| Reverse 3 |
10.7 mph / 17.2 km/h |
| Wheels | |
| Drum Width |
3.69 ft / 1125 mm |
| Drum Diameter |
4.3 ft / 1299 mm |
| Outside Diameter |
5.5 ft / 1677 mm |
| Wheel Weight |
3893 lb / 1766 kg |
| Hydraulic System | |
| Relief Valve Setting |
3500 psi / 24125 kPa |
| Blades | |
| Moldboard Length |
14.4 ft / 4390 mm |
| Height, Including Cutting Edge |
3.4 ft / 1034 mm |
| Maximum Depth of Cut |
1.02 ft / 312 mm |
| Maximum Lift Above Ground |
3.06 ft / 932 mm |
| Blade Tip Angle - Total |
13.5 Degrees / 13.5 Degrees |
| Blade Tip Angle - Forward |
6.9 Degrees / 6.9 Degrees |
| Blade Tip Angle - Back |
6.6 Degrees / 6.6 Degrees |
| Blade Tilt Angle - Right - Mechanical |
4.3 Degrees / 4.3 Degrees |
| Blade Tilt Angle - Left - Mechanical |
4.3 Degrees / 4.3 Degrees |
| Blade Tilt Angle - Right - Hydraulic |
5.6 Degrees / 5.6 Degrees |
| Blade Tilt Angle - Left - Hydraulic |
5.6 Degrees / 5.6 Degrees |
| Blade Tilt Angle - Right Full |
10 Degrees / 10 Degrees |
| Blade Tilt Angle - Left Full |
10 Degrees / 10 Degrees |
| Total Tilt Adjustment |
2.6 ft / 787 mm |
| Width Over End Bits |
15.18 ft / 4628 mm |
| Service Refill Capacities | |
| Fuel Tank |
159 gal / 603 L |
| Cooling System |
21.9 gal / 83 L |
| Crankcase |
9 gal / 34 L |
| Transmission |
16.4 gal / 62 L |
| Differentials and Final Drives - Front |
23.8 gal / 90 L |
| Differentials and Final Drives - Rear |
23.8 gal / 90 L |
| Dimensions | |
| Height to Top of Cab |
12.3 ft / 3755 mm |
| Height to Top of Exhaust Pipe |
12 ft / 3647 mm |
| Height to Top of Hood |
8.8 ft / 2692 mm |
| Height to Bottom of Ladder |
1.6 ft / 502 mm |
| Center Line of Rear Axle to Edge of Counterweight |
8.8 ft / 2687 mm |
| Center Line of Rear Axle to Hitch |
6.1 ft / 1850 mm |
| Wheelbase |
12.1 ft / 3700 mm |
| Length with Blade on Ground |
27.7 ft / 8443 mm |
| Ground Clearance |
1.4 ft / 414 mm |
| Width Over End Bits |
15.2 ft / 4628 mm |
| Width Over Drums |
11.98 ft / 3650 mm |
| Blade Height Straight |
3.39 ft / 1034 mm |
| Drum Width |
44.29 in / 1125 mm |
| Blade Width Straight |
14.4 ft / 4390 mm |
| Center Line of Rear Axle to Edge of Rear Bumper |
8.8 ft / 2687 mm |
| Height to Rear Bumper |
3.1 ft / 941 mm |
| Operating Specifications | |
| Turning Radius Blade - Outside |
24.3 ft / 7417 mm |
| Turning Radius Blade - Inside |
11 ft / 3362 mm |
| Shipping Specifications | |
| Weight |
68796 lb / 31200 kg |
| Height |
12.32 ft / 3755 mm |
| Width |
14.4 ft / 4390 mm |
Need for additional information ?