| Engine | |
| Engine Model | Cat® C6.6 ACERT? VHP |
| Base Power (all gears) Net |
138 hp / 103 kW |
| Displacement |
403 in3 / 6.6 L |
| Bore |
4.13 in / 105 mm |
| Stroke |
4.92 in / 125 mm |
| Speed @ rated power | 2000 RPM |
| Base Power (1st gear) ? Net |
138 hp / 103 kW |
| VHP range ? Net | 103-114 kW (138-153 hp) |
| Torque rise (VHP Plus) | 40% |
| VHP Plus range ? Net | 103-136 kW (138-182 hp) |
| Max torque |
690 lb ft / 859 N·m |
| Number of cylinders | 6 |
| Derating altitude |
11500 ft / 3505 m |
| Std - Fan speed - max | 1150 RPM |
| Std - Fan speed - min | 550 RPM |
| Std - Ambient Capability |
109 ° F / 43 ° C |
| Hi Ambient ? Fan Speed ? Max | 1650 RPM |
| Hi Ambient ? Fan Speed ? Min | 550 RPM |
| Hi Ambient Capability |
122 ° F / 50 ° C |
| Power Train | |
| Forward/Reverse Gears | 8 Fwd / 6 Rev |
| Transmission | Direct drive, power shift, countershaft |
| Brakes ? Service | Multiple oil-disc |
| Brakes ? Service, surface area |
3565 in2 / 23000 cm2 |
| Brakes ? Parking | Multiple oil disc |
| Brakes ? Secondary | Dual circuit control system |
| All-Wheel Drive | |
| Motor Type |
/
|
| Pump Type |
/
|
| Operational Gears - forward |
/
|
| Operational Gears - reverse |
/
|
| Hydraulic System | |
| Circuit type | Electro-hydraulic load sensing, closed center |
| Pump type | Variable piston |
| Pump output |
40 gal/min / 151 L/min |
| Maximum system pressure |
3500 psi / 24100 kPa |
| Standby Pressure |
450 psi / 3100 kPa |
| Operating Specifications | |
| Top Speed ? Fwd. |
27.7 mph / 44.5 km/h |
| Top Speed ? Rev. |
23.5 mph / 37.8 km/h |
| Turning radius, outside front tires |
24.5 ft / 7.5 m |
| Steering range ? left/right | 47.5° |
| Articulation angle ? left/right | 20° |
| Fwd. 1st |
2.4 mph / 3.9 km/h |
| Fwd. 2nd |
3.3 mph / 5.3 km/h |
| Fwd. 3rd |
4.75 mph / 7.6 km/h |
| Fwd. 4th |
6.5 mph / 10.5 km/h |
| Fwd. 5th |
10.2 mph / 16.4 km/h |
| Fwd. 6th |
13.8 mph / 22.2 km/h |
| Fwd. 7th |
19 mph / 30.6 km/h |
| Fwd. 8th |
27.7 mph / 44.5 km/h |
| Rev. 1st |
2 mph / 3.3 km/h |
| Rev. 2nd |
3.8 mph / 6.2 km/h |
| Rev. 3rd |
5.6 mph / 8.9 km/h |
| Rev. 4th |
8.6 mph / 13.9 km/h |
| Rev. 5th |
16.1 mph / 26 km/h |
| Rev. 6th |
23.5 mph / 37.8 km/h |
| Service Refill | |
| Fuel Capacity |
90 gal / 341 L |
| Cooling system |
8.7 gal / 33 L |
| Hydraulic system ? Tank |
16.9 gal / 64 L |
| Engine Oil |
3.7 gal / 14 L |
| Trans./Diff./Final Drives |
16.5 gal / 62.5 L |
| Tandem housing (each) |
15.6 gal / 59 L |
| Front wheel spindle bearing housing |
0.1 gal / 0.5 L |
| Circle drive housing |
1.8 gal / 7 L |
| Frame | |
| Drawbar - yoke bar thickness |
0.75 in / 19.1 mm |
| Drawbar ? Thickness |
0.4 in / 9.5 mm |
| Drawbar ? Width |
3 in / 76.2 mm |
| Circle ? Diameter |
60.2 in / 1530 mm |
| Circle ? Blade beam thickness |
1.4 in / 35 mm |
| Drawbar ? Height |
6 in / 152 mm |
| Front frame structure ? Width |
10 in / 254 mm |
| Front frame structure ? Height |
10 in / 254 mm |
| Front frame structure ? Thickness |
0.6 in / 16 mm |
| Front axle ? Height to center |
22.5 in / 572 mm |
| Front axle ? Wheel lean, left/right | 18° |
| Front axle ? Total oscillation per side | 32° |
| Tandems | |
| Height |
19.76 in / 502 mm |
| Width |
6.76 in / 171.7 mm |
| Sidewall thickness ? Inner |
0.5 in / 14 mm |
| Sidewall thickness ? Outer |
0.6 in / 16 mm |
| Drive chain pitch |
1.8 in / 44.5 mm |
| Wheel axle spacing |
59.5 in / 1510 mm |
| Tandem oscillation ? Front up | 15° |
| Tandem oscillation ? Front down | 25° |
| Moldboard | |
| Moldboard ? Height |
24 in / 610 mm |
| Moldboard ? Thickness |
0.87 in / 22 mm |
| Arc radius |
16.3 in / 413 mm |
| Throat clearance |
4.9 in / 123.9 mm |
| Cutting edge ? Width |
6 in / 152.4 mm |
| Cutting edge ? Thickness |
0.6 in / 16 mm |
| End Bit ? Width |
6 in / 152.4 mm |
| End Bit ? Thickness |
0.6 in / 16 mm |
| Blade Pull ? Base GVW |
20350 lb / 9230 kg |
| Blade Pull ? Max GVW |
24218 lb / 10985 kg |
| Down Pressure ? Base GVW |
16435 lb / 7455 kg |
| Down Pressure ? Max GVW |
29125 lb / 13211 kg |
| Blade width |
12 ft / 3.668 m |
| Blade Range | |
| Circle centershift ? Right |
25.8 in / 656 mm |
| Circle centershift ? Left |
25.8 in / 656 mm |
| Moldboard sideshift ? Right |
26 in / 660 mm |
| Moldboard sideshift ? Left |
20.1 in / 510 mm |
| Maximum blade position angle | 90° |
| Blade tip range ? Forward | 40° |
| Blade tip range ? Backward | 5° |
| Maximum shoulder reach outside of tires ? Right |
75 in / 1905 mm |
| Maximum shoulder reach outside of tires ? Left |
68.6 in / 1742 mm |
| Maximum lift above ground |
16.8 in / 427 mm |
| Maximum depth of cut |
28.3 in / 720 mm |
| Ripper | |
| Ripping depth, maximum |
17 in / 428 mm |
| Ripper shank holder spacing |
21 in / 533 mm |
| Ripper shank holders | 5 |
| Penetration force |
17705 lb / 8031 kg |
| Pryout force |
26303 lb / 11931 kg |
| Machine length increase, beam raised |
39.2 in / 995 mm |
| Scarifier | |
| Mid, V-Type ? Scarifying depth, maximum |
11.5 in / 292 mm |
| Rear ? Scarifying depth, maximum |
10.5 in / 266 mm |
| Mid, V-Type ? Scarifier shank holder spacing |
4.6 in / 116 mm |
| Mid, straight ? Working width |
71 in / 1800 mm |
| Mid, straight ? Scarifier shank holder spacing |
4.4 in / 111 mm |
| Mid, straight ? Scarifying depth, maximum |
12.5 in / 317 mm |
| Mid, straight ? Scarifier shank holders | 17 |
| Mid, V-Type ? Scarifier shank holders | 11 |
| Front, V-Type, 5 or 11 tooth ? Scarifier shank holders | 5 / 11 |
| Front, V-Type, 5 or 11 tooth ? Working width |
47.4 in / 1205 mm |
| Front, V-Type, 5 or 11 tooth ? Scarifying depth, maximum |
18.4 in / 467 mm |
| Front, V-Type, 5 or 11 tooth ? Scarifier shank holder spacing |
4.6 in / 116 mm |
| Mid, V-Type ? Working width |
46.6 in / 1184 mm |
| Rear ? Working width |
91 in / 2300 mm |
| Rear ? Scarifier shank holders | 9 |
| Rear ? Scarifier shank holder spacing |
10.5 in / 267 mm |
| Weights | |
| Gross Vehicle Weight, max ? Total |
44690 lb / 20271 kg |
| Gross Vehicle Weight, max ? Front axle |
16446 lb / 7460 kg |
| Gross Vehicle Weight, max ? Rear axle |
28244 lb / 12811 kg |
| Gross Vehicle Weight, base ? Front axle |
9280 lb / 4209 kg |
| Gross Vehicle Weight, base ? Rear axle |
22611 lb / 10256 kg |
| Gross Vehicle Weight, base ? Total |
31891 lb / 14466 kg |
| Dimensions | |
| Height - top of cab |
129 in / 3278 mm |
| Length - counterweight to ripper |
389.3 in / 9889 mm |
| Width - outside front tires |
97.7 in / 2481 mm |
| Length - front axle to mid tandem |
232.8 in / 5915 mm |
| Length - front tire to rear of machine |
334.1 in / 8488 mm |
| Length - front axle to moldboard |
98.85 in / 2511 mm |
| Length - between tandem axles |
59.5 in / 1511 mm |
| Width - outside rear tires |
97.7 in / 2481 mm |
| Width - tire center lines |
84.1 in / 2136 mm |
| Height - front axle center |
22.5 in / 572 mm |
| Height to exhaust stack |
112.4 in / 2855 mm |
| Height to top of cylinders |
113.7 in / 2890 mm |
| Ground clearance at rear axle |
13.6 in / 347 mm |
| Standards | |
| Brakes | ISO 3450:1996 |
| Sound | ISO 6394:1998 / ISO 6395:1988 |
| ROPS/FOPS | ISO 3471:1992 / ISO 3449:1992 |
| Steering | ISO 5010:1992 |
Need for additional information ?