| Engine | |
| Base Power (all gears) Net |
259 hp / 193 kW |
| Displacement |
677 in3 / 11.1 L |
| VHP - gears 4-8 Net |
273.57 hp / 204 kW |
| Bore |
5.1 in / 130 mm |
| Stroke |
5.5 in / 140 mm |
| Max torque |
1049 lb ft / 1422 N·m |
| Base Power (1st gear) ? Net |
259 hp / 193 kW |
| VHP Plus range ? Net | 193-219 kW (259-294 hp) |
| VHP range ? Net | 193-204 kW (259-274 hp) |
| Derating altitude |
13000 ft / 3962 m |
| Std - Ambient Capability |
109 ° F / 43 ° C |
| Hi Ambient ? Fan Speed ? Max | 1650 RPM |
| Hi Ambient ? Fan Speed ? Min | 550 RPM |
| Hi Ambient Capability |
122 ° F / 50 ° C |
| Power Train | |
| Brakes ? Service | oil-actuated, oil-disc |
| Brakes ? Service, surface area |
5347 in2 / 34500 cm2 |
| Brakes ? Parking | Spring applied, hydraulically released |
| Brakes ? Secondary | Oil-actuated, oil-disc |
| Hydraulic System | |
| Pump output |
74 gal/min / 280 L/min |
| Maximum system pressure |
3500 psi / 24150 kPa |
| Standby Pressure |
450 psi / 3100 kPa |
| Operating Specifications | |
| Top Speed ? Fwd. |
31 mph / 49.8 km/h |
| Top Speed ? Rev. |
24.5 mph / 39.4 km/h |
| Turning radius, outside front tires |
25.9 ft / 7.9 m |
| Steering range ? left/right | 47.5° |
| Articulation angle ? left/right | 20° |
| Fwd. 1st |
2.7 mph / 4.3 km/h |
| Fwd. 2nd |
3.7 mph / 5.9 km/h |
| Fwd. 3rd |
5.3 mph / 8.6 km/h |
| Fwd. 4th |
7.3 mph / 11.8 km/h |
| Fwd. 5th |
11.4 mph / 18.3 km/h |
| Fwd. 6th |
15.4 mph / 24.8 km/h |
| Fwd. 7th |
21.3 mph / 34.2 km/h |
| Fwd. 8th |
31 mph / 49.8 km/h |
| Rev. 1st |
2.1 mph / 3.4 km/h |
| Rev. 2nd |
4 mph / 6.4 km/h |
| Rev. 3rd |
5.8 mph / 9.3 km/h |
| Rev. 4th |
9 mph / 14.5 km/h |
| Rev. 5th |
16.9 mph / 27.1 km/h |
| Rev. 6th |
24.5 mph / 39.4 km/h |
| Service Refill | |
| Fuel Capacity |
130 gal / 492 L |
| Cooling system |
12.3 gal / 46.5 L |
| Hydraulic system ? Tank |
15.9 gal / 60 L |
| Engine Oil |
7.9 gal / 30 L |
| Trans./Diff./Final Drives |
23.5 gal / 89 L |
| Tandem housing (each) |
25.5 gal / 96.5 L |
| Front wheel spindle bearing housing |
0.24 gal / 0.9 L |
| Circle drive housing |
1.6 gal / 6 L |
| Frame | |
| Drawbar ? Width |
3 in / 76.2 mm |
| Circle ? Diameter |
71.75 in / 1822 mm |
| Circle ? Blade beam thickness |
2 in / 50 mm |
| Drawbar ? Height |
8 in / 203.2 mm |
| Front frame structure ? Width |
12 in / 304.8 mm |
| Front frame structure ? Height |
16 in / 406.4 mm |
| Front frame structure ? Thickness |
0.6 in / 15.9 mm |
| Front axle ? Height to center |
25.2 in / 640 mm |
| Front axle ? Wheel lean, left/right | 17.1° |
| Front axle ? Total oscillation per side | 32.0° |
| Tandems | |
| Height |
24.25 in / 616 mm |
| Width |
8.4 in / 214 mm |
| Sidewall thickness ? Inner |
0.8 in / 20 mm |
| Sidewall thickness ? Outer |
0.8 in / 20 mm |
| Drive chain pitch |
2.24 in / 57 mm |
| Wheel axle spacing |
65 in / 1656 mm |
| Tandem oscillation ? Front up | 15° |
| Tandem oscillation ? Front down | 25° |
| Moldboard | |
| Moldboard ? Height |
27 in / 688 mm |
| Moldboard ? Thickness |
1 in / 25 mm |
| Arc radius |
16.3 in / 413 mm |
| Throat clearance |
4.6 in / 117 mm |
| Cutting edge ? Width |
8 in / 203 mm |
| Cutting edge ? Thickness |
0.6 in / 16 mm |
| End Bit ? Width |
6 in / 152 mm |
| End Bit ? Thickness |
0.6 in / 16 mm |
| Blade Pull ? Base GVW |
30829 lb / 13984 kg |
| Blade Pull ? Max GVW |
39619 lb / 17971 kg |
| Down Pressure ? Base GVW |
22130 lb / 10038 kg |
| Down Pressure ? Max GVW |
38781 lb / 17591 kg |
| Blade width |
14 ft / 4.267 m |
| Blade Range | |
| Circle centershift ? Right |
20.5 in / 520 mm |
| Circle centershift ? Left |
25.5 in / 650 mm |
| Moldboard sideshift ? Right |
31.1 in / 790 mm |
| Moldboard sideshift ? Left |
29.1 in / 740 mm |
| Blade tip range ? Forward | 40° |
| Blade tip range ? Backward | 5° |
| Maximum shoulder reach outside of tires ? Right |
89.7 in / 2279 mm |
| Maximum shoulder reach outside of tires ? Left |
85.4 in / 2169 mm |
| Maximum lift above ground |
16.5 in / 419 mm |
| Maximum depth of cut |
17.3 in / 438 mm |
| Ripper | |
| Ripping depth, maximum |
15.8 in / 401 mm |
| Shank holder spacing ? Min |
15 in / 373 mm |
| Shank holder spacing ? Max |
19 in / 472 mm |
| Penetration force |
27222 lb / 12348 kg |
| Pryout force |
28146 lb / 12767 kg |
| Machine length increase, beam raised |
45.5 in / 1156 mm |
| Weights | |
| Gross Vehicle Weight, max ? Total |
65998 lb / 29936 kg |
| Gross Vehicle Weight, max ? Front axle |
9969 lb / 9969 kg |
| Gross Vehicle Weight, max ? Rear axle |
44021 lb / 19967 kg |
| Gross Vehicle Weight, base ? Front axle |
12541 lb / 5689 kg |
| Gross Vehicle Weight, base ? Rear axle |
34255 lb / 15538 kg |
| Gross Vehicle Weight, base ? Total |
46796 lb / 21226 kg |
| Dimensions | |
| Height - top of cab |
139.2 in / 3535 mm |
| Length - counterweight to ripper |
429 in / 10896 mm |
| Width - outside front tires |
109.9 in / 2791 mm |
| Length - front axle to mid tandem |
258 in / 6559 mm |
| Length - front tire to rear of machine |
370.6 in / 9412 mm |
| Length - front axle to moldboard |
112 in / 2842 mm |
| Length - between tandem axles |
65 in / 1656 mm |
| Width - outside rear tires |
109.9 in / 2791 mm |
| Width - tire center lines |
93 in / 2361 mm |
| Height - front axle center |
25.2 in / 640 mm |
| Height to exhaust stack |
128.2 in / 3256 mm |
| Height to top of cylinders |
112.4 in / 2855 mm |
| Ground clearance at rear axle |
15.1 in / 383 mm |
| Standards | |
| ROPS/FOPS | ISO 3471 / ISO 3499 |
Need for additional information ?